Conversion kit PROSAT PLUS 4 class for Viadrus U22 and U26 - 4 segments
Regular price:
product unavailable
add to wish list
Description
The set is designed to convert an ordinary, cast iron Viadrus U22 and U26 boiler into an automatic boiler equipped with a controller and fan.
The set is adapted for burning the following fuels: hard coal – eco pea coal, lignite – eco pea coal.
To increase the longevity and durability of the entire set, a special burner was made of cast iron which is much more resistant to high temperatures and rust than ordinary steel. Thanks to the use of modern technologies during burner construction, it became possible to burn lower quality fuels as well as those with higher moisture content.
The base of the set is universal and can be mounted on either the right or left side of the boiler. The fuel tank has a capacity of approximately 180 kg (coal). The doors are sealed so that moist air cannot reach the fuel.
The expansion set can also be applied to all steel boilers that fit dimensionally to the base.
Check if your boiler is suitable for expansion:
- measure the bottom of your boiler
- Compare the outline of the bottom of your boiler with the base dimensions shown in the drawings.
We recommend purchasing a controller with the set.
The set includes:
- feeder
- fuel tank
- base
- controller (option)
- fan
We recommend purchasing a controller with the set.
ELECTRONICS SP18 Controller
Controller functions:
- simple operation
- fan control in the full range of revolutions
- LCD display
- possibility of adjusting the temperature of switching on the C.O. pump
- maintaining the set temperature
- possibility of working in C.O. or C.W.U. priority mode
- summer mode
- C.W.U. hysteresis
- economy mode, automatic reduction of fuel supply when reaching the set temperature
- control of fuel supply timings and supply intervals
- sustaining operation
- extinction function, turns off the feeder and fan after fuel burns out in the combustion chamber
- supervision function delaying system freezing
- manual operation function
- controller works with a room regulator
- controller stores settings even after power disconnection
- controller returns to automatic operation upon power resumption
TECH ST-37N RS Controller
Controller equipment:
- LCD display
- CO, C.W.U., feeder temperature sensor (protection)
- has thermal protection (thermal switch)
- panel housing for boiler installation or in a metal housing
Functions performed by the controller:
- CO pump control
- C.W.U. pump control
- fan and screw or piston feeder control
- possibility of connecting ST-65 GSM module
- possibility of connecting ST-505 Ethernet module
- possibility of connecting a room regulator with RS communication or traditional
- possibility of controlling two valves using additional ST-61 v4 or ST-431N modules
- weekly control (optional)
BRULI Controller
Set includes:
- BRULI controller
- operator panel with display
- SD card - parameter archiving, work history
- CO temperature sensor
- flue gas temperature sensor
- feeder temperature sensor
- C.W.U. temperature sensor
- return temperature sensor
- external temperature sensor, which can be used as an internal computer cable rs232
- two additional cables for connecting pumps/fan/feeder
- each controller is equipped at the factory with an ethernet module and www panel
Main features of the controller:
- remote operation and adjustment of boiler regulator parameters from anywhere in the world using a web browser
- control and limitation of flue gas temperature based on fuzzy logic
- controller software update via the internet
- adjustment of service parameters of the regulator and calibration of sensors using a web browser
- recording alarms and other events on a memory card
- recording boiler operating parameters on a memory card
- setting normal (daytime) and reduced (nighttime) temperatures for central heating and hot water in daily and weekly cycles
- weather regulator with the possibility of setting normal (daytime) and reduced (nighttime) temperatures in daily and weekly cycles
- room regulator with the possibility of setting normal (daytime) and reduced (nighttime) temperatures in daily and weekly cycles
- possibility of cooperation with a room thermostat
- independent thermal protection of the boiler against uncontrolled temperature increase
Convert your Viadrus boiler into a feeder boiler.

| Dimensions of expansion sets | ||||
| Basic dimensions [mm] | 4 - section | 5 - sections | 6 - sections | 7 - sections |
| A | 545 | |||
| B | 1032 | |||
| C | 1525 | |||
| D | 1391 | |||
| E | 684 | 795 | 906 | 1017 |
| F | 420 | |||
| G | 620 | |||
| H | 504 | 615 | 726 | 837 |
| I | 129 | |||
| J | 273 | |||
| K | 273 | |||
| L | 96 | |||
| Ł | 1113 | |||
| M | 676 | |||
| N | 1153 | |||
| O | 1245 | |||
Technical data
| Boiler class (303-5:2012) | 4 |
| Number of segments | 4 szt. |

All reviews (positive and negative) are displayed. We don't verify that they come from customers who have purchased the product.