Accumulation tank GALMET Multi-Inox 1500 with 2 coils
Accumulation tank Multi-inox with stainless steel coil for domestic hot water made of helically corrugated steel pipe. Accumulation tanks fully cooperate with wood boilers, boilers for pellets, gas and oil boilers. Coil made of helically corrugated steel pipe guarantees hygienic preparation of hot water.
Accumulation tank has got:
- stainless steel coil for domestic hot water made of helically corrugated steel pipe
- two extra coils made of black steel:
- lower (solar),
- upper.
Thanks to low temperature in the bottom part of Accumulation tank it's possible to have cold water at return to solar collector, and thus more effective use of sun energy. Coil made of helically corrugated steel pipe under the inside pressure is self-cleaning. Swirls inside tank prevente of deposition stone on the surface.
Large heating surface of coil in higher temperature scale of heating factor (central heating) provides high performance of hot water, while coil in lower temperature scale provides pre-heating water and cooling down the tank.
Technical data:
Technical data | Unit | Multi-Inox 600 b/w | Multi-Inox 800 b/w | Multi-Inox 1000 b/w | Multi-Inox 1500 b/w | Multi-Inox 2000 b/w |
Catalogue number | - | 70-601600 | 70-801600 | 70-101600 | 70-151600 | 80-201600 |
Storage capacity of central heating tank | l. | 597 | 726 | 911 | 1390 | 1904 |
ErP energy efficiency class - Neodul® | - | C | ||||
Max. tank operating pressure | MPa | 0.3 | ||||
Max. boiler water temperature | °C | 90 | ||||
Max. operating temperature of solar collector exchanger | °C | 110 | ||||
Surface of the lower / upper exchanger | m2 | 1.4 / 1.4 | 1.8 / 1.8 | 3.0 / 2.4 | 4.5 / 3.0 | |
Exchanger capacity | l | 9.8 / 9.8 | 12.6 / 12.6 | 20.9 / 16.8 | 33.5 / 20.9 | |
Max. operating pressure of upper exchanger | Mpa | 1.6 | ||||
Max. operating pressure of upper exchanger | Mpa | 1.6 | ||||
Max. operating pressure of the DHW exchange | Mpa | 0.6 | ||||
Max. operating temperature of the DHW exchange | °C | 90 | ||||
Exchanger surface for hot water | m2 | 4.1 | 5.7 | 7.7 | 8.25 | |
Capacity of hot water exchanger | l | 22 | 30.5 | 41 | 44 | |
Flow through hot water exchanger. 45°C | l/min | 20 | 40 | |||
Flow capacity 65 °C | l/10min | 268 | 510 | 574 | 520 | 572 |
Stainless tube heat exchanger power (supply temperature ≈ 65°C) | kW | 45 | 61.5 | 91 | 117 | 128 |
h1 - Boiler water connection (Gw) | "/mm | 6/4 / 275 | 6/4 / 250 | 6/4 / 380 | ||
h2 - supply connection for hot water. (Gw) | "/mm | 5/4 / 270 | 5/4 / 400 | 5/4 / 380 | ||
h3 - Boiler water connection - (Gw) | "/mm | 6/4 / 275 | 6/4 / 250 | 6/4 / 380 | ||
h4 - return connection from exchanger (Gw) | "/mm | 1 / 345 | 1 / 330 | 1 / 460 | 1 / 450 | |
h5 - muffle under sensor cover I (Ø) | "/mm | 1/2 / 420 | 1/2 / 380 | 1/2 / 510 | 1/2 / 610 | |
h6 - boiler water connection (Gw) | "/mm | 6/4 / 490 | 6/4 / 455 | 6/4 / 530 | 6/4 / 705 | 6/4 / 655 |
h7 - muffle for sensor cover II (Ø) | "/mm | 1/2 / 640 | 1/2 / 570 | 1/2 / 680 | 1/2 / 875 | 1/2 / 840 |
h8 - power supply connection of exchanger (Gw) | "/mm | 1 / 745 | 1 / 750 | 1 / 1260 | 1 / 1250 | |
h9 - Boiler water connection (Gw) | "/mm | 6/4 / 700 | 6/4 / 685 | 6/4 / 815 | 6/4 / 1015 | 6/4 / 925 |
h10 - muffle for sensor III shielding (Ø) | "/mm | 1/2 / 865 | 1/2 / 750 | 1/2 / 980 | 1/2 / 1240 | 1/2 / 1070 |
h11 - Boiler water connection (Gw) | "/mm | 6/4 / 915 | 6/4 / 900 | 6/4 / 1100 | 6/4 / 1325 | 6/4 / 1205 |
h12 - Boiler water connection (Gw) | "/mm | 6/4 / 1130 | 6/4 / 1115 | 6/4 / 1380 | 6/4 / 1640 | 6/4 / 1475 |
h13 - return connection from the exchanger (Gw) | "/mm | 1 / 1105 | 1 / 1060 | 1 / 1370 | 1 / 1590 | 1 / 1410 |
h14 - mufa pod osłonę czujnika IV (Gw) | "/mm | 1/2 / 1215 | 1/2 / 1150 | 1/2 / 1440 | 1/2 / 1680 | 1/2 / 1530 |
h15 - przyłącze wody kotłowej (Gw) | "/mm | 6/4 / 1340 | 6/4 / 1335 | 6/4 / 1665 | 6/4 / 1950 | 6/4 / 1750 |
h16 - coupler for sensor shield IV (Gw) (Ø) | "/mm | 1/2 / 1410 | 1/2 / 1450 | 1/2 / 1720 | 1/2 / 2020 | 1/2 / 1830 |
h17 - exchanger supply connection (Gw) | "/mm | 1 / 1505 | 1 / 1480 | 1 / 1790 | 1 / 2190 | 1 / 1960 |
h18 - boiler water connection (Gw) | "/mm | 6/4 / 1555 | 6/4 / 1550 | 6/4 / 1950 | 6/4 / 2260 | 6/4 / 2030 |
h19 - connection for hot water supply. (Gw) | "/mm | 5/4 / 1560 | 5/4 / 1555 | 5/4 / 1950 | 5/4 / 2260 | 5/4 / 2030 |
L - height | mm | 1900 | 1880 | 2270 | 2665 | 2500 |
d - diameter of tank without insulation | mm | 700 | 790 | 900 | 1100 | |
D - diameter of insulated tank | mm | 860 | 950 | 1100 | 1300 | |
Height at inclination | mm | 2120 | 2130 | 2470 | 2890 | 2820 |
Tank weight (without warming) | kd | 205 | 210 | 238 | 330 | 378 |
Product specification
Boiler water capacity | 1387 l |
Amount of coils | 3 item |
Weight (without isolation) | 330 kg |
Maximum boiler water temperature | 90 °C |
Maximum pressure for boiler water tank | 0.3 MPa |
Coil size (bottom) | 3 m² |
Maximum temp. for solar / central heating coil | 110 °C |
Coil size (top) | 2.4 m² |
Coil capacity (bottom) | 20 l |
Coil capacity (top) | 16 l |
Maximum pressure for top coil | 1.6 MPa |
Maximum pressure for bottom coil | 1.6 MPa |
Maximum temp. of domestic hot water - SPIRAFLEX | 90 °C |
Max. pressure in domestic hot water coil - SPIRAFLEX | 0.6 MPa |
Capacity of SPIRAFLEX domestic water coil | 48 l |
Size of SPIRAFLEX domestic water coil | 6.95 m² |
Water flow | 45 l/min |
Height | 2665 mm |
Diameter (without isolation) | 900 mm |
Diameter (with isolation) | 1100 mm |
Isolation | 100 mm |
External Enclosure | skay |
Boiler connections | 1 1/2 inch |
Domestic hot water connections | 1 1/4 inch |
Solar circuit (inlet/outlet) | 1 inch |
Central heating circuit (inlet/outlet) | 1 inch |
Muff (heater) | 1 1/2 inch |
Sensor connection | 1/2 inch |
Release | 1 inch |
Opinions
ℹ️ Viewed reviews are moderated. We do not verify that they come from customers who have purchased the product.