Manual fired boiler for coal Ogniwo Classic DS 18kW
Ogniwo Classic DS boiler is device designed to heat both domestic hot water and central heating water. An integral part is an accumulation tank, which must be operated together with the boiler. The fuel used in the combustion process is coal, which is delivered to the boiler by hand through the back fill door. To fully optimize the combustion process, the incoming air is regulated by means of throttle the lower door, which can be adjusted manually or by a thrust gauge, centre door damper, as well as by two secondary air dampers.
The lower door, which can be adjusted manually or by a thrust gauge, a centre door damper, as well as by two secondary air dampers on the sides of the boiler. The grate of the boiler is made of grey cast iron and a moving grate alternately. Properly adjusted shape causes the air to be supplied to the whole surface of the grate causing a more efficient combustion process. In daily operation, the grate mechanism was used to remove the excess ash. The rear part of the combustion chamber is a ceramic nozzle consisting of three ceramic fittings. The fittings are replaceable and wearable, they provide the following conditions for optimal combustion of the exhaust gases flowing through the nozzles.
Parameter | Unit | Boiler Classic DS 10 kW | Boiler Classic DS 13 kW | Boiler Classic DS 18 kW | Boiler Classic DS 24 kW |
Rated thermal power of the water circuit |
kW | 10 | 13 | 18 | 24 |
Heating surface of the water jacket | m2 | 1,3 | 1,7 | 2,4 | 2,7 |
Capacity of the fuel chamber | dm3 | 27 | 37 | 55 | 63 |
Maximum working pressure | bar | 2 | 2 | 2 | 2 |
Case dimension width x depth x height | mm x mm x mm | 400 x 520 x 1090 | 400 x 570 x 1127 | 520 x 570 x 1167 | 520 x 610 x 1215 |
Boiler weight | kg | 210 | 230 | 270 | 320 |
Thread of output and return ferrules | cal | G1 ½ | G1 ½ | G1 ½ | G1 ½ |
Required chimney draught | Pa | 20 | 20 | 20 | 25 |
Minimum chimney section | cm x cm | 16 x 16 | 16 x 16 | 16 x 16 | 16 x 16 |
Ø mm | 180 | 180 | 180 | 180 | |
Dimension of the loading door light width/ height | mm x mm | 205 x 190 | 205 x 190 | 305 x 175 | 305 x 175 |
Dimension of the furnace chamber width/ depth/ height | mm x mm x mm | 225 x 275 x 440 | 275 x 275 x 500 | 275 x 400 x 500 | 300 x 400 x 530 |
Estimated useful floor area of the building | m2 | do 120 | do 160 | do 220 | Do 280 |
Sizes
Boiler Type | A | B | C | D | E | F | G | H | I | J | K | L | Ł | M |
Ogniwo Classic DS 10 | 140 | 1150 | 240 | 265 | 952 | 520 | 715 | 400 | 500 | 1090 | 125 | 80 | 65 | 95 |
Ogniwo Classic DS 13 | 140 | 1180 | 240 | 265 | 985 | 570 | 760 | 400 | 500 | 1128 | 125 | 80 | 65 | 95 |
Ogniwo Classic DS 18 | 160 | 1225 | 240 | 265 | 1014 | 570 | 750 | 520 | 620 | 1167 | 125 | 85 | 65 | 115 |
Ogniwo Classic DS 24 | 160 | 1270 | 240 | 265 | 1034 | 606 | 793 | 520 | 620 | 1215 | 125 | 90 | 65 | 115 |
Boiler elements
- Boiler thermometer
- Cleanroom doors
- Back-up doors
- Air damper
- Hearth and ash doors
- Air damper
- Mobile grate lever
- Secondary air controller
- Air spigot
- Exhaust gas throttle lever
- Flue pipe cleaning
- Return nozzle
- Water discharge nozzle
- Wheel mounting feet
Product specification
Power output | 18 kW |
Weight | 270 kg |
Boiler class (303-5:2012) | 5 |
Ecodesign | + |
Height | 1167 mm |
Width | 520 mm |
Depth | 570 mm |
Max working pressure | 2 bar |
Warranty | 2 lata |
Opinions
ℹ️ Viewed reviews are moderated. We do not verify that they come from customers who have purchased the product.