Contact:  📞 +48 32 415 31 65📱 +48 695 11 88 05
Selling since 1984
Kotly.com.pl
0
Coal boiler STALMARK AGRO PID - 10 kW with exhaust gases temperature sensor

Coal boiler STALMARK AGRO PID - 10 kW with exhaust gases temperature sensor

Available Options

Stalmark PID boiler is equipped with a newest microprocessor regulator which is steering the power of the boiler. The regulator is controlling the temperature of the exhaust outlet (keeping them on a constant level) and keeping the constant temperature of the boiler.

The controller except standard sensors is also equipped with the exhaust outlet sensor. Thanks to that, the temperature of fumes are always at the same level. The controller is constantly measuring the temperature of fumes at the outlet. In case of significant rise of temperature at the outlet of the boiler, the work of the fan is slowed down or stopped.

Using this type of steering with the exhaust outlet sensor, the user can save up to 13% of fuel. In addition, the temperature of the water output is very stable and extends the life of heat exchanger (boiler). The control of the temperature of fumes at the outlet of the boiler causes lower dust and hazardous gases emmission and the heat energy from the fumes is not wasted but used for heating.


Advantages of Stalmark "PID" boiler:

the possibility of combusting every type of solid fuel

quick and easy maintance

controller is using two pumps: central heating pump and domestic hot water pump

large chamber furnace


Warranty:

- 48 months for water tightness of the exchanger, however no longer than 54 months from the production date

- 24 months for electric and mechanical devices (controller, ventilator)

- 12 months for flue gas temperature sensor and the furnace door protection

 

 

 

Fuel
Primary fuel Other
miał węglowy ekogroszek węgiel kamienny drewno
Culm Coal 5-25mm Coal Wood  

Product specification

Power output 10 kW
Weight 241 kg
Exhaust gas pipe diameter 180 mm
Efficiency 80 %
Size of heated surface 100 m²
Water capacity 42 L
Boiler heating surface 1.1 m²
Height 1320 mm
Width 500 mm
Exhaust pipe distance measured from the floor to its axis. 1006 mm
Depth 830 mm
Max. water temperature 95 °C
Max working pressure 1.5 bar
Size of the combustion chamber (width/depth/height) 250 x 325 x 320 mm
Required chimney draught 20 Pa
Min. chimney height 6 m
Outlet and inlet size 6⁄4" inch
Min. incoming water temperature 55 °C
Power supply 230V / 50 Hz

Opinions

If you have experience with this product add your opinion !

ℹ️ Viewed reviews are moderated. We do not verify that they come from customers who have purchased the product.

Your mark
On this website we are using cookies files. If you want, you can turn off cookies in your browser settings. OK, close ad or find out more.