Exchanger with 1 spiral coil GALMET SGW(S) ErP C - 100 L
This is the smallest SGW(S) series of exchangers, ideally suited for use in small domestic hot water installations.
Connections are located in rear part of exchanger ensuring convenient installation, coil placed inside enables quick and economic heating of domestic water by connecting to central heating boiler or fireplace. Alternatively, an electric heater located at bottom of tank can be used. Exchanger also has a possibility to connect an external circulation pump. The stands are used to level exchanger.
A coil with an increased heat transfer surface ensures stable water temperatures and efficient exchanger operation. It is placed at bottom of tank to increase efficiency of water heating. Dense polyurethane foam insulation is responsible for minimal heat loss.
Protection against corrosion is provided by EXTRA GLASS® ceramic enamel, applied wet on entire inner surface of tank. This protects tank from rusting. Additionally, exchanger is protected by a replaceable magnesium anode which also protects electric heater. Possible to mount a maintenance-free active titanium anode as an optional accessory.
Exchanger itself does not need any additional control. A hot water sensor connected to central heating boiler is responsible for maintaining temperature. Installing an optional heater with a thermostat speeds up heating of water in tank or can heat tank independently during the summer.
Materials used in production are of the highest quality combined with modern technology and experience of employees translate into high quality of exchanger, for which manufacturer provides a 60-month warranty.
|Technical specification||unit||SGW(S) 100||SGW(S) 120||SGW(S) 140|
|ErP Energy efficiency class*||-||B||B||B|
|max. operating pressure of the tank||MPa||0.6||0.6||0.6|
|max. operating pressure heat exchanger||MPa||0.6||0.6||0.6|
|max. operating temperature of the tank||°C||100||100||100|
|max. operating temperature heat exchanger||°C||110||110||110|
|surface heat exchanger||m²||0.6||0.95||0.95|
|capacity of heat exchanger||l.||2.6||4.1||4.1|
|power of heat exchanger (70/10/45°C)||kW||16||23||23|
|exchanger efficiency (70/10/45°C)||l/h||390||560||560|
|power of heat exchanger (80/10/45°C)||kW||21.1||30.4||30.4|
|exchanger efficiency (80/10/45°C)||l/h||510||740||740|
|demand for heating water from boiler||m³/h||2.5||2.5||2.6|
|Magnesiumanode plug 5/4"||mm||25x390||25x390||25x390|
|h1 - the cold water inlet IT 3/4"||mm||210||165||165|
|h2 - Water outlet in the heating IT 3/4"||mm||310||250||250|
|h3 - cover the sensor I - pipe Ø 3/8"||mm||400||375||375|
|h4 - circulation IT 3/4"||mm||500||450||450|
|h5 - Hot water inlet heating IT 3/4"||mm||710||750||750|
|h6 - Water outlet Usable hot water IG 3/4"||mm||790||920||1070|
|L - height||mm||1020||1120||1270|
|D - the outer diameter of the tank||mm||518||518||518|
|Water capacity||100 l|
|Max working pressure||6 bar|
|Exchanger surface||0.6 m²|
|Exchanger power 70°/10°/45°||16 kW|
|Exchanger efficiency 70°/10°/45°||390 l/h|
|Exchanger power 80°/10°/45°||21.1 kW|
|Exchanger efficiency 80°/10°/45°||510 l/h|
|Demand for heating water from boiler||2.5 m³/h|